Rear Tire Flat: If the flat tire is on a rear tire of
the vehicle, you will need to use the jack handle (C)
and both jack handle extensions (D). Attach the
wheel wrench to the jack handle extensions. Attach
the jack handle to the jack. Use the jacking pad
provided on the rear axle. Turn the wheel wrench
clockwise to raise the vehicle. Raise the vehicle
far enough off the ground so there is enough room
for the spare tire to clear the ground.
4. Remove all the
wheel nuts and
take off the flat tire.
Rear Position – 1500
Series
Rear Position – 2500
Series
5-85
To Next Page
Loading...
