Halogen Bulbs
{CAUTION:
Halogen bulbs have pressurized gas
inside and can burst if you drop or
scratch the bulb. You or others could be
injured. Be sure to read and follow the
instructions on the bulb package.
Headlamps
To replace one of these bulbs, do the following:
1. Open the hood. See Hood Release on
page 497 for more information.
2. If you are replacing the bulb on the passenger
side remove the Engine Air Cleaner cover.
See Engine Air Cleaner/Filter (Gasoline
Engines) on page 505 for more information.
3. Reach in and access the bulb sockets from
inside the engine compartment.
4. Turn the bulb socket counterclockwise to
remove it from the headlamp assembly
and pull it straight out.
5. Unplug the electrical connector from the old
bulb by releasing the clips on the bulb socket.
6. Replace it with a new bulb socket.
7. Plug in the electrical connector to the new
bulb socket.
8. Reinstall the new bulb socket into the
headlamp assembly and turn it clockwise
to secure.
9. Close the hood.
544
To Next Page
Loading...
