Bulb Replacement
For the proper type of replacement bulbs, see
Replacement Bulbs on page 481.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen Bulbs
{CAUTION:
Halogen bulbs have pressurized gas
inside and can burst if you drop or
scratch the bulb. You or others could be
injured. Be sure to read and follow the
instructions on the bulb package.
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
A. Taillamp/Turn Signal
Lamp
B. Back-up Lamp
C. Stoplamp/Taillamp
To replace one of these bulbs, do the following:
1. Open the liftgate. See Power Liftgate on
page 125 for more information.
478
To Next Page
Loading...
