Seats and Restraints 3-65
Example — Rear Driver Side
Position
2.1. When using a child restraint
with a top tether in the rear
driver side position:
A. Raise the headrest
or head restraint.
B. Route the top
tether (B) between
the headrest or
head restraint posts,
through the loop (A),
behind the inboard
headrest or head
restraint post, and
under the center
shoulder belt (C).
C. Attach the top
tether (B) to
the top tether
anchor (loop) (D)
at the center rear
seating position.
2.2. When using a child restraint
with a top tether in the rear
center position:
A. Route the top
tether (B) through
the center loop (D),
and behind the
inboard passenger
side headrest or
head restraint post.
B. Attach the top
tether (B) to the
top tether anchor
(loop) at the rear
passenger side
seating position.
2.3. When using a child restraint
with a top tether in the rear
passenger position:
A. Raise the headrest
or head restraint.
B. Route the top
tether (B) between
the headrest or
head restraint posts,
through the loop
on the passenger
side and behind the
inboard headrest or
head restraint post.
C. Attach the top
tether (B) to
the top tether
anchor (loop) (D)
at the center rear
seating position.
To Next Page
Loading...
