EasyManua.ls Logo

GMC 2011 Yukon XL Denali - Remote Vehicle Start

GMC 2011 Yukon XL Denali
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (4,1)
GMC Yukon Denali/Yukon XL Denali Owner Manual - 2011
1-4 In Brief
K : Press to unlock the driver door.
Press
K again within three seconds
to unlock all remaining doors.
Q : Press to lock all doors.
Lock and unlock feedback can
be personalized. See Vehicle
Personalization on page 544.
m : Press and hold to unlock the
liftglass.
& : Press and hold to open or
close the power liftgate.
L : Press and release to locate
the vehicle.
Press
L and hold for more than
two seconds to sound the panic
alarm.
Press
L again to cancel the panic
alarm.
See Keys on page 22 and Remote
Keyless Entry (RKE) System on
page 23.
Remote Vehicle Start
With this feature the engine can be
started from outside of the vehicle.
Starting the Vehicle
1. Aim the RKE transmitter at the
vehicle.
2. Press
Q.
3. Immediately after completing
Step 2, press and hold
/ until
the turn signal lamps flash.
When the vehicle starts, the parking
lamps will turn on and remain on as
long as the engine is running. The
doors will be locked and the climate
control system may come on.
The engine will continue to run for
10 minutes. Repeat the steps for a
10-minute time extension. Remote
start can be extended only once.
Canceling a Remote Start
To cancel a remote start:
.
Aim the RKE transmitter at the
vehicle and press and hold
/
until the parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Turn the ignition on and then
back off.
See Remote Vehicle Start on
page 25.

Table of Contents

Related product manuals