Vehicle Care 10-77
Jacking Locations (Overall View)
A. Front Position
B. Rear Position
4. Position the jack under the
vehicle, as shown.
Front Position – 2500 Models
Front Position – 1500 Models
Front Tire Flat: If the flat tire is
on a front tire of the vehicle, use
the jack handle and only one
jack handle extension. Attach
the wheel wrench to the jack
handle extension. Attach the
jack handle to the jack (A).
Position the jack on the frame
behind the flat tire where the
frame sections overlap. Turn the
wheel wrench clockwise to raise
the vehicle. Raise the vehicle far
enough off the ground so there
is enough room for the spare tire
to clear the ground.
To Next Page
Loading...
