72 Seats and Restraints
5. Disconnect the rear safety belt
mini-latch using a key in the
slot on the mini-buckle, and let
the belt retract into the
headliner.
7. Stow the mini-latch in the
holder in the headliner.
8. Pull up on the lever on the
back of the seat to release the
seatback.
9. Push the seatback forward to
lay flat.
10. Repeat the steps for the other
seatback, if desired.
Automatic Operation
The transmission must be in
P (Park) for this feature to work.
1. Second Row Power Seat
Buttons
2. Third Row Power Seat
Buttons
To fold the seatback (if equipped):
1. Open the liftgate to access the
controls for the seat.
2. Make sure that there is nothing
under, in front of, or on
the seat.
3. Fully lower the head restraints.
See Head Restraints 0 60. Put
the second row seatbacks in
the upright position. See
Second Row Seats 0 67.
To Next Page
Loading...
