6
Power Seat Adjustments
F
A. Seat Adjustment
Move the horizontal control to move the seat
forward or rearward and to tilt, raise or lower
the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or raise
the seatback.
C. Lumbar Support Adjustment
Press the rear control to adjust the amount
of lumbar support.
Set Memory Seat Positions
F
With the ignition On or in Accessory mode:
1. Adjust the seat and power outside mirrors to
the desired positions.
2. Press and release the SET button on the
driver’s door. A beep will sound.
3. Immediately press and hold button 1
until two beeps sound.
Repeat these steps using button 2 for a second
driver.
To store a seat position for more clearance when exiting the vehicle, repeat these steps using
the
Exit button instead of button 1 or 2.
Recall Memory Seat Positions
F
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position.
The memory/exit positions can be programmed to be recalled automatically.
To set the Auto Memory Recall or Easy Exit options, go to Settings > Vehicle > Comfort and
Convenience.
See Seats and Restraints in your Owner’s Manual.
FRONT SEATS
STEERING WHEEL ADJUSTMENT
With the vehicle parked, push down the lever or use the power control
F
on the left side of the
steering column to adjust the steering wheel. The steering wheel can be moved up or down
and in or out. Pull up the lever to lock the steering wheel in place.
See Instruments and Controls in your Owner’s Manual.
F
Optional equipment
A
C
B
To Next Page
Loading...
