GMC 2018 ACADIA - Initial Drive and Keyless Entry Systems

8
POWER LIFTGATE
Open/Close the Power Liftgate
Press the Power Liftgate button on the
Remote Keyless Entry transmitter twice.
Press the Power Liftgate knob on the
driver’s door (A).
Press the touchpad (B) on the liftgate handle
to open the liftgate.
Press the button (C) next to the liftgate latch
to close the liftgate.
Programming the Liftgate Height
Turn the Power Liftgate knob to the 3/4
modeposition.
Open the liftgate.
Adjust the liftgate manually to the
desired height.
To save the setting, press and hold the
button next to the liftgate latch (C) for 3
seconds. The turn signals will flash when the
setting is saved.
Hands-Free Operation
F
To open or close the liftgate hands-free,
kickyour foot straight under the left corner
ofthe rear bumper. The Remote Keyless
Entry transmitter must be within 3 feet of
the liftgate.
See Keys, Doors and Windows in your Owner’s Manual.
ELECTRIC PARKING BRAKE
To apply the parking brake, press the
Parking Brake switch.
To release the parking brake, turn on the
ignition, press the brake pedal, and then
press the switch.
Note: The parking brake will release automatically
if the vehicle is running, placed into gear and an
attempt is made to drive.
See Driving and Operating in your Owner’s Manual.
F Optional equipment
C
A
B
B