Need help?Do you have a question about the GMC BD1500 and is the answer not in the manual?
Explains symbols found on the tool's rating plate and their meanings.
Lists key technical details including voltage, power, speeds, and dimensions.
Guidelines for maintaining a clean, well-lit, and hazard-free workspace.
Precautions concerning power outlets, cords, and avoiding wet conditions.
Recommendations for operator alertness, PPE, and appropriate attire.
Proper handling, maintenance, and safe operational practices for the tool.
Essential checks and actions before operating the sander to prevent injury.
Guidelines for workpiece handling, clearance, and avoiding kickback.
Safe practices for workpiece setup, handling, and avoiding slips.
Labels and identifies the main parts of the belt and disc sander.
Explains the purpose and operation of key sander parts.
Instructions for securely attaching the sander to a workbench.
Steps for fitting the sanding disc and its protective guard.
Guidance on fitting the work support for sanding operations.
Steps for assembling and attaching the work table.
Instructions for configuring the sander for vertical belt sanding.
How to safely turn the sander on and off using the controls.
Adjusting the table for and performing bevel sanding operations.
Adjusting the belt bed for horizontal or vertical use.
How to perform flat surface sanding on the belt.
Techniques for sanding the ends of workpieces on the belt.
Methods for sanding internal and external curves.
Using the mitre gauge for sanding small end surfaces on the disc.
Guidelines for keeping the tool clean, lubricated, and in good working order.
Information on power cord replacement and safety.
Regular checks for loose screws and overall tool condition.
Instructions regarding authorized service centers for repairs.
To Next Page
General
