11
SETTING CRUISE CONTROL
1. Press the On/O button. The Cruise Control symbol will illuminate in white
on the instrument cluster.
2. When traveling at the desired speed, press down the switch to the SET position to
set the speed. The symbol will illuminate in green on the instrument cluster.
ADJUSTING CRUISE CONTROL
+RES Resume/Accelerate
Press up to resume a set speed. When
active, press once to increase speed 1 mph;
press and hold to continue increasing speed.
–SET Set/Coast
When active, press down once to decrease
speed 1 mph; press and hold to continue
decreasing speed.
Cancel
Press the button, or press the brake pedal, to cancel Cruise Control without
erasing the set speed from memory.
The set speed is erased when Cruise Control or the vehicle ignition is turned o.
ADAPTIVE CRUISE CONTROL
F
The system maintains the set speed and a following gap — the time between your
vehicle and a vehicle detected directly ahead — by accelerating or braking automati-
cally while you continue to steer.
Press the
Following Gap switch to select a targeted following gap setting of
Far, Medium or Near. This is also the Forward Collision Alert setting.
Press and hold the Cancel button to switch between regular Cruise Control
and Adaptive Cruise Control.
See Driving and Operating in your Owner’s Manual.
F
Optional equipment Some equipment shown may not be included in your vehicle.
CRUISE CONTROL
HEAD-UP DISPLAY
F
The Head-Up Display (HUD) projects some
operating information on the windshield.
Temporary information and vehicle mes-
sages also may be displayed.
Go to Controls > HUD on the infotain-
ment screen to turn the HUD on/o
and to adjust the display brightness
and position.
See Instruments and Controls in your Owner’s Manual.
To Next Page
Loading...
