GMC Chevrolet CHEVELLE 1969 User Manual

A checklist to ensure a safe driving experience by reviewing driver and vehicle conditions.

Details on the vehicle's integrated theft protection system for ignition, steering, and transmission.

Procedure for starting the engine, including notes on battery life and cold weather operation.

Guidance on shifting gears and operating vehicles with manual transmission systems.

Explanation of operating Chevrolet automatic transmission systems for optimal performance.

Specific operating procedures for Powerglide and Turbo Hydra-Matic transmissions.

Advice on descending grades and using brakes to prevent overheating.

How to maintain position on an upgrade without damaging the transmission or clutch.

Guidelines for parking the vehicle, including engaging the parking brake and transmission.

Instructions for towing the vehicle with the ignition key available.

Special provisions for towing the vehicle when the ignition switch is in the 'lock' position.

Methods for starting the engine in an emergency, including push-starting and jumper cables.

Indicates engine overheating; check immediately if light illuminates while driving.

Warns of low oil pressure. Stop engine if light remains on during driving.

Indicates the status of the generating system; should turn off after engine starts.

Measures engine speed in revolutions per minute; avoid red area to prevent damage.

Indicates coolant temperature; monitor to prevent engine overheating.

Displays oil pressure to the engine's parts; proper lubrication is crucial.

Operation of hazard warning flashers for signaling a vehicle hazard.

Indicates parking brake status or hydraulic issues in the brake system.

Proper use and care of lap and shoulder belts for passenger safety.

Guidance on wearing shoulder belts correctly for maximum protection.

Instructions for lowering and raising the convertible top, with cautions.

Covers lubrication, alignment, tire rotation, brake services, oil changes, and emission controls.

Details on replacing items like brake linings, spark plugs, filters, and wiper blades.

Specifies fuel grade requirements for different Chevrolet engines.

Guidance on selecting and using engine oils that meet GM 6041-M standard.

Chart for selecting proper oil viscosity based on anticipated temperature range.

How to check coolant levels and maintain the cooling system for optimal performance.

Guidelines for maintaining proper tire inflation pressure for vehicle handling and life.

Step-by-step instructions on how to safely change a tire.

Procedure for operating the vehicle jack safely and correctly.

Recommended intervals for changing engine oil based on mileage and time.

Importance of tune-ups for maintaining performance, economy, and emissions control.

Maintenance of the Air Injection Reactor system for reducing exhaust emissions.

Recommended intervals for replacing the PCV valve to control emissions.

Recommendation for replacing the engine oil filter at specified intervals.

Checking and filling fluid levels for 3-Speed and 4-Speed transmissions.

Checking fluid levels for Powerglide, THM 350, and Torque Drive.

Periodic inspection of brake linings for wear.

Information on fuses and circuit breakers protecting the vehicle's wiring circuits.