Getting to Know Your Envoy XUV
8
Manually raise or lower fan speed
• Press the upper or lower portion of
the FAN control ( ) button.
Manually adjust the dual temperature
controls
• Use the knob on the left-hand side of
the climate control panel to adjust the
temperature on the driver side of the
vehicle. Use the right-hand knob to
adjust the temperature on the pas-
senger side of the vehicle as well as
the second row.
• To match and link the passenger-side
temperature to the driver’s setting,
press and hold the AUTO button for
three seconds.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the RECIRCULATE ( )
button.
This feature can be activated while in
the VENT or BI-LEVEL mode, but not in
DEFOG, DEFROST or FLOOR mode.
Clear the windshield and front side
windows of fog or frost more quickly
• Press the FRONT DEFROST ( )
button.
Clear the rear glass of fog or frost
more quickly, and activate the heated
outside rearview mirrors (if equipped)
• Press the REAR DEFOG ( )
button.
See Section 3 of your Owner Manual.
Rear Seat Climate Controls
Turn the rear controls on and off
• Press the Power ( ) button. (Note:
The rear controls do not function
when the front climate control is on
and in DEFROST mode.)
Increase or decrease fan speed
• Press the Fan ( ) up or down
arrows to increase or decrease fan
speed.
Change the direction of airflow
• Use the mode knob on SLE models
or the arrows ( ) on SLT models
to select UPPER, BI-LEVEL or
FLOOR.
Set the temperature of air through the
rear outlets
• Temperature of air from the rear
outlets is determined by the front
passenger temperature setting.
See Section 3 of your Owner Manual.
SLT shown. SLE similar.
To Next Page
Loading...
