90 Instruments and Controls
calibration is complete. The
DIC display will then return to
PRESS
V TO CALIBRATE
COMPASS.
Clock
The clock can be set with either the
radio turned on or off.
AM-FM Radio
To set the time:
1. Press
H until the hour begins
flashing on the display. Press
this button a second time and
the minutes begin flashing on
display.
Press
H a third time and the
12HR or 24HR time format
begins flashing.
2. While either the hour or the
minutes are flashing, turn the
f
knob, on the upper right side of
the radio, clockwise or
counterclockwise to increase or
decrease the time. While the
12HR or 24HR time format is
flashing, turn the
f knob
clockwise or counterclockwise
to select the default time
settings.
3. Press
H again until the clock
display stops flashing to set the
currently displayed time;
otherwise, the flashing stops
after five seconds and the
current time displayed is
automatically set.
Radio with CD/MP3
To set the time and date:
1. Press
H and the HR, MIN, MM,
DD, and YYYY (hour, minute,
month, day, and year) display.
2. Press the softkey under any
one of the tabs to be changed.
Every time the softkey is
pressed again, the time or the
date if selected, increases
by one.
Another way to increase the
time or date is to press
¨
SEEK or \ FWD (forward).
3. To decrease, press
© SEEK or
s REV. Turn the f knob, on
the upper right side of the
radio, to adjust the selected
setting.
Changing the Time and Date
Default Settings
To change the time or date default
settings:
1. Press
H and then the softkey
under the forward arrow that is
currently displayed on the radio
screen until the time 12H
(hour) and 24H (hour), and the
date MM/DD (month and day)
and DD/MM (day and month)
are displayed.
2. Press the softkey under the
desired option.
3. Press
H again to apply the
selected default, or let the
screen time out.
To Next Page
Loading...
