Flash-to-Pass
This feature lets you use the high-beam
headlamps to signal a driver in front of you that
you want to pass. It works even if the headlamps
are in the automatic position.
To use this feature, pull the multifunction lever
toward you, then release it.
If the headlamps are in the automatic position
or on low beam, the high-beam headlamps will
turn on. They’ll stay on as long as you hold
the lever toward you. The high-beam indicator
on the instrument panel cluster will come on.
Release the lever to return to normal operation.
Windshield Wipers
The windshield wipers are controlled by the lever
located on the right side of the steering column.
The windshield wipers have these positions:
9 (OFF): Turn the knob at the end of the
windshield wiper lever to turn off the wipers.
- - - (Intermittent): Turn the knob to the
intermittent setting to delay the wiper speed.
This can be very useful in light rain or snow.
When you turn the knob to this setting, you can
also set the wiper speed. See the following text
for more information.
105
To Next Page
Loading...
