Hourmeter Gage
To access the engine hourmeter gage press the
trip odometer button three times.
The instrument panel cluster displays the
accumulated engine run time hours using the
reconfigurable odometer display. The engine run
time hours displays only when the ignition is in
the LOCK/OFF or ACC/ACCESSORY position
and the trip reset switch is pressed for about
four seconds.
When the ignition is in the LOCK/OFF or ACC/
ACCESSORY position, the instrument panel cluster
displays the engine accumulated hours for up to
30 seconds. The value of the accumulated hours
does not change when the battery is disconnected.
The hourmeter resets to 0.0 when 10,000 hours
are accumulated. The instrument panel cluster
begins to reaccumulate the engine run time hours
from 0.0 hours.
Audio System(s)
Determine which radio your vehicle has and then
read the pages following to familiarize yourself
with its features.
{CAUTION:
This system provides you with far greater
access to audio stations and song listings.
Giving extended attention to entertainment
tasks while driving can cause a crash and
you or others can be injured or killed.
Always keep your eyes on the road and
your mind on the drive — avoid engaging
in extended searching while driving.
Keeping your mind on the drive is important for
safe driving. See Defensive Driving on page 148.
Here are some ways in which you can help
avoid distraction while driving.
137
To Next Page
Loading...
