{CAUTION:
A cab not properly locked in the tilted
position could fall, causing serious injury.
To ensure that the cab is securely locked
in position and will not move, the safety
lock pin (A) must always be inserted into
the cab support (B) when the cab is in the
tilted position.
{CAUTION:
Things that burn can get on hot engine
parts and start a fire. These include
liquids like fuel, oil, coolant, brake fluid,
windshield washer and other fluids, and
plastic or rubber. You or others could be
burned. Be careful not to drop or spill
things that will burn onto a hot engine.
Lowering the Cab
When the cab is ready to be lowered, follow the
instructions below carefully. Before lowering
the cab, be sure all filler caps are on properly.
1. Remove the safety
lock pin from the cab
support by turning it
and pulling it out.
245
To Next Page
Loading...
