Capacities and Specifications (cont’d)
Application
Capacities
English Metric
Rear Axle – Tandem
DS404 (front) (HPE); RS404 (rear) 32.0 pt 15.1 L
Rear Axle – Two-Speed
19060T (HPL); 21060T (H15) 38.0 pt 18.0 L
23080T (H25) 44.0 pt 20.8 L
Transmission Fluid, Automatic
2200 Series; 2350 Series, 2500 Series, 2550 Series 40.0 pt* 19.0 L*
MD 3000; MD 3500 with PTO Provision 59.8 pt 28.1 L
MD 3000; MD 3500 without PTO Provision 52.0 pt 24.6 L
*Add 2 pints (1 L) when changing spin-on or remote filter.
See the Allison Automatic Transmission Operator’s Manual for fluid check and maintenance information.
Transmission Fluid, Manual
FS5406; FS6406 19.5 pt 9.2 L
RT8709B 26.0 pt 12.3 L
RT8908LL 28.0 pt 13.2 L
All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this
manual. Recheck the fluid level after filling.
287
To Next Page
Loading...
