GMC Terrain 2010 - Page 120

4-28 Instruments and Controls
Vehicle Information Menu
Items
Press the MENU button until Vehicle
Information Menu is displayed. Then
press
x to scroll through the
following menu items:
.
Unit
.
Tire Pressure
.
Remaining Oil Life
.
Blank
Unit
Press
V or SET/CLR to enter the
unit menu. Then press
w or x to
switch between US or Metric
when the Unit display is active.
Press
V or SET/CLR to confirm
the setting. This will change the
displays on the cluster and DIC to
either metric or English (US)
measurements.
Tire Pressure
The display will show a vehicle with
the approximate pressures of all
four tires. Tire pressure is displayed
in either pounds per square
inch (psi) or in kilopascal (kPa).
Any time the tire pressures are
adjusted the system needs to
relearn the new pressures. To
relearn the tire pressures press
V or
SET/CLR while the Tire Pressure
display is active. The display will
ask for confirmation of a relearn.
Press
w or x to select Yes or No.
Then press
V or SET/CLR to
confirm the selection. See Tire
Pressure Monitor System
on
page 9‑53
and Tire Pressure
Monitor Operation
on page 9‑55 for
more information.
Remaining Oil Life
This display shows an estimate of
the oil's remaining useful life.
If “Remaining Oil Life 99%” is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the “Change Engine Oil Soon”
message will appear on the display.
See Engine Oil Messages
on
page 4‑31
. The oil should be
changed as soon as possible. See
Engine Oil
on page 9‑10 . In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the
Maintenance Schedule in this
manual. See Scheduled
Maintenance
on page 10‑2 for
more information.