GMC TERRAIN 2022 - Setting Cruise Control; Traction Select System

18
The Traction Select system automatically adjusts various vehicle control systems based on
driving preferences, weather and road conditions.
Rotate the Driver Mode Control knob on the center console to the desired mode.
FWD Models:
Tour
Snow
AWD Models:
Tour
All-Wheel Drive
O-Road
The AWD indicator will illuminate when an all-
wheel drive mode is selected.
See Driving and Operating in your Owner’s Manual.
TRACTION SELECT SYSTEM
CRUISE CONTROL
SETTING CRUISE CONTROL
1. Press the On/O button. The Cruise Control symbol will illuminate in white on the
instrument cluster.
2. When traveling at the desired speed, press the SET– button to set the speed. The
symbol will illuminate in green on the instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press to resume a set speed. When the
system is active, press to increase speed.
SET– Set/Coast
When the system is active, press to decrease
speed.
Cancel
Press the button, or press the brake pedal,
to cancel the Cruise Control without erasing the set speed from memory. The set speed is
erased when Cruise Control or the vehicle ignition is turned o.
ADAPTIVE CRUISE CONTROL
F
The system enhances regular Cruise Control to maintain a driver-selected following gap —
the time between your vehicle and a vehicle detected directly ahead — by accelerating or
braking automatically while you continue to steer.
Press the Following Gap button to select a targeted following gap setting of Far,
Medium, or Near. This is also the Forward Collision Alert setting.
Press and hold the Cancel button to switch between regular Cruise Control and
Adaptive Cruise Control.
See Driving and Operating in your Owner’s Manual.
F Optional equipment