GMC Terrain 2025 - Page 133

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18552429) - 2025
132 Infotainment System
The code on the phone and infotainment
d
i
splay need to be acknowledged for
pairing to be successful.
8. If apreviously paired mobile device is
not connecting to the Bluetooth system,
try forgetting the mobile device on the
vehicle’s infotainment system and also
forgetting the vehicle in the Bluetooth
settings of the mobile device.
9. If the vehicle name does not appear on
your phone under the “other devices” or
“available devices” menu, there are afew
ways to start the pairing process over:
•
Turn Bluetooth off then back on, on
your phone.
•
Go back to the beginning
of the Phone menus on the
infotainment display and restart the
pairing process.
•
Turn the phone off and then back on.
•
Reset the phone, but this step should
be done as alast effort.
10. If the phone prompts to accept connection
or allow phone book download, select
Always Accept and Allow. The phone book
may not be available if not accepted.
11. To pair additional phones, select Settings
>
Connections >Phones.
First to Connect Paired Phones
If multiple paired phones are within range of
the system, the system connects to the paired
phone that is set as First to Connect. To enable
apaired phone as the First to Connect phone:
1. Make sure the phone is turned on.
2. Select the Settings icon on the infotainment
home screen.
3. Select Connections.
4. Select Phone.
5. Select Options under the connected phone.
6. Select First to Connect from the phone’s
settings menu and set First to Connect
to On.
Phones and mobile devices can be added,
removed, connected, and disconnected. Asub-
menu will display whenever arequest is made
to add or manage phones and mobile devices.
Accessing the Device List Screen
There are two ways to access the device
list screen:
Using the Settings Icon
1.
Select the Settings icon on the infotainment
home screen or the Settings icon on the
application tray near the left of the display.
2. Select Connections.
3. Select Phones.
Using the Phone Icon
1. Select the Phone icon on the infotainment
home screen or the Phone icon on the
application tray near the left of the display.
2.
Select * on the Phones screen.
3. Select Connected Phone.
Disconnecting aConnected Phone
To disconnect aphone:
1. Open the Device List Screen. See “Accessing
the Device List Screen” previously in
this section.
2. Select Option on the phone card to show the
phone’s or mobile device’s settings.
3. Select Disconnect.
Deleting aPaired Phone
To delete apaired phone: