6
A. Seat Cushion Adjustment
Move the front horizontal control to
move the seat forward or rearward, or
to tilt, raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to recline or
raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to
increase/decrease lumbar support or up/
down to raise/lower the lumbar location.
1. With the vehicle in Park, adjust the
power driver’s seat, power adjustable
pedals, power outside mirrors, and
power tilt/telescopic steering column to
the desired positions.
2. Press and release the SET button and
then press and hold button 1 on the
driver’s door until a beep sounds.
3. Repeat the steps using button 2 for a
second driver.
Power Front seats
F Optional equipment
Set Memory Positions
F
Seat Adjustments
Set Exit Position
1. Adjust the power driver’s seat, power adjustable pedals power, and power tilt/telescopic
steering column to the desired positions.
2. Press and release the SET button and then press and hold the Exit button on the
driver’s door until a beep sounds.
Recall Positions
With the ignition on and the vehicle in Park, press and release button 1 or 2 or the
Exit button to recall the stored position.
With the vehicle off or not in Park, press and hold button 1 or 2 or the Exit button
until the stored position is reached. Releasing the button before the stored position is
reached cancels the recall.
Note: To change the memory recall and exit settings, go to Comfort and Convenience in the Vehicle
Settings menu.
See Seats and Restraints in your Owner Manual.
C
A
B
To Next Page
Loading...
