GMC Yukon 2021 - Page 159

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-13690468) - 2021 - CRC - 2/18/20
158 Infotainment System
.
The audio content information such as
title, artist, and album.
.
The tracks album art.
.
The current position and total playing
time. Drag the progress point to move to
the position wanted.
.
The playback controls.
Playback controls are always displayed.
Playback controls include:
.
{ (Home): Touch { to return to the RSI
Home selection screen.
.
X (Headphones): Touch X to access the
Bluetooth Headphone Setup menu. See
“Settings” later in this section.
.
Browse: Touch Browse to display the
audio browser menu. See “Audio Browser”
later in this section.
.
Previous/Next: Touch 7 or 6 to select
the previous or next audio content.
.
p or j (Play or Pause): Touch p to play
or touch
j to pause the audio content.
.
Shuffle: Touch to play the playlist
randomly.
.
Share: Touch to share the audio playback
with the other screen. Swiping the screen
to left or right also shares the screen.
Audio Browser
Touch Browse to go to the audio browser
screen.
The following will display:
.
Content in the connected media source
can be sorted by Playlists, Artists, Albums,
Songs, Genres, Podcasts, and Audiobooks.
Touch
T to move to the next page.
.
The audio content currently being played.
Touch this section and it moves to the
audio playback screen.
.
The content sorted by the standard you
choose. Touch the content wanted.
Miracast / HDMI
Miracast Connection
Connect Miracast compatible devices to
either the RSI screen by mirroring the
display of the mobile device through
WiFi-Direct. The system supports two
Miracast device connections at a time (one
for each screen) and allows both screens to
view that single connection simultaneously
through screen sharing.
Apple does not support the Miracast
standard.
To connect initially:
1. Touch Miracast in Watch section of the
home screen. The RSI system starts to
initialize the Miracast connection.
2. Select “%Rear Seat%” from your mobile
device's the Wi-Fi list. The device
connection pop-up message is displayed.
Touch OK. Touching Decline goes back to
the home screen.
3. Some Miracast enabled devices require to
enter a PIN number, supplied by the
device, into the RSI system or on the
device in order to complete the
connection process.
4. When the full connection is complete,
the RSI screen displays a mirror image of
the mobile devices display onto the
associated RSI screen.