GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-16417394) - 2023 - CRC - 5/16/22
286 Driving and Operating
Always use the correct hitch equipment for
your vehicle. Crosswinds, large trucks going
by, and rough roads can affect the trailer
and the hitch.
Proper hitch equipment for your vehicle
helps maintain control of the vehicle-trailer
combination. Many trailers can be towed
using a weight-carrying hitch which has a
coupler latched to the hitch ball, or a tow
eye latched to a pintle hook. Other trailers
may require a weight-distributing hitch that
uses spring bars to distribute the trailer
tongue weight between your vehicle and
trailer axles. See “Maximum Trailer Tongue
Weight Rating” under Trailer Towing 0 281
for weight limits with various hitch types.
Avoid sharp turns when using a step-bumper
hitch to prevent damage. Make wider turns
to prevent contact between your trailer and
your bumper.
Hitch Cover
To remove hitch cover, if equipped:
1. Remove the two fasteners on the lower
tabs (2).
2. Pull the lower edge of the cover to
about a 45 degree angle.
3. Pull the cover upward to disengage the
upper attachments (1).
To reinstall hitch cover:
1. Hold cover at a 45 degree angle to the
vehicle and push the upper tabs into the
slots in the bumper.
2. Push the bottom of the cover forward
until the lower tabs line up with the
lower slots.
3. Snap the hitch cover into place by
pushing the upper corners forward (1).
4. Reinstall the two fasteners on the lower
tabs (2).
Consider using mechanical sway controls
with any trailer. Ask a trailering professional
about sway controls or refer to the trailer
manufacturer's recommendations and
instructions.
Weight-Distributing Hitch and
Adjustment
A weight-distributing hitch may be useful
with some trailers. Use the following
guidelines to determine if a
weight-distributing hitch should be used.
To Next Page
Loading...
