GMC Yukon 2025 - Speedometer; Odometer; Trip Odometer; Tachometer

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
108 Instruments and Controls
Night Vision: I
f
equipped, displays the Night
Vision camera onto the instrument cluster. See
Night Vision System 3269.
Use the right steering wheel control to
op
en and scroll through the different items
and displays.
To change the cluster configuration, press i
on the right steering wheel control.
If equipped, to change the gauge faces, press
and hold i and use y or z on the right
steering wheel control. Press V on the right
steering wheel control to select the desired
option from the list.
The following conditional gauges may be
di
splayed while in aparticular driver mode:
•
Engine Oil Temperature
•
Engine Oil Pressure
•
Voltmeter
•
Transmission Temperature
Display Settings
The following options can be turned on or off
using the infotainment display. Some may not
be available for your particular vehicle. See
Settings 3166.
Speed Sign
Shows sign information from aroadway
database in the onboard navigation. The sign
will show “− −” when there is no detected speed
limit or the system is unavailable.
Turn-by-Turn Graphics
Provides Turn-by-Turn navigation graphics
during an active route in your driver display.
Traffic Sign Recognition
Displays the detected speed limit in your
driver display.
Speedometer
Th
e speedometer shows the vehicle speed in
either kilometers per hour (km/h) or miles per
hour (mph).
Odometer
The odometer shows how far the vehicle has
been driven, in either kilometers or miles.
Trip Odometer
The trip odometer shows how far the vehicle
has been driven since the trip odometer was
last reset.
The trip odometer is accessed and reset
through the Vehicle Status. See Vehicle Status
3126.
Tachometer
The tachometer displays the engine speed in
revolutions per minute (rpm).
The tachometer may vary by several hundred
rpm, during Auto Stop mode, when the engine
is shutting off and restarting.