GMC Yukon 2025 - Vehicle Speed Messages; Universal Remote System Programming; Universal Remote System

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
Instruments and Controls 133
Vehicle Speed Messages
S
P
EED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed
has been limited to the speed displayed.
The limited speed is aprotection for various
propulsion and vehicle systems, such as
lubrication; thermal; brakes; suspension; Teen
Driver, if equipped; or tires.
If equipped with adiesel engine, see the
Duramax Diesel Engine Supplement for
additional information.
Universal Remote System
See Radio Frequency Statement 3416.
Universal Remote System
Programming
If equipped, the Universal Remote (e.g., garage
door) controls are located in the Controls menu
on the infotainment screen.
This system can replace up to eight hand-held
transmitters (remote controls), such as garage
door openers, security systems, and home
automation devices. The following instructions
a
ddress garage door openers, but can be used
for other devices.
Do not use the Universal Remote system with
any garage door opener that does not have
the stop and reverse feature. This includes
any garage door opener model manufactured
before April 1, 1982.
Keep the original hand-held transmitter for
use in other vehicles and future programming.
Ensure the Universal Remote system is erased
when vehicle ownership is terminated. See
“Erasing Universal Remotes.”
Programming the Universal
Remote System
Programming involves time-sensitive actions
and may time out, requiring the procedure
to be repeated. Read these instructions
completely before programming the Universal
Remote system. It may help to have another
person assist with the programming process.
If your garage door opener includes a hand-held
transmitter, make sure it has anew battery
for quick and accurate transmission of the
radio-frequency signal.
Clear all people and objects away from the
ga
rage door.
Park the vehicle outside and directly facing
the garage door opener receiver. The vehicle
must remain in P(Park) for the entire duration
of programming.
1. From the infotainment home screen,
select Controls >See More Controls
>Universal Remotes. Then select the “Add
Remote” option.
2. If you have ahand-held transmitter, press
“Yes” to the question on the screen and
proceed to Step 3.
If your garage door opener does not include
ahand-held transmitter, press either “D-
Mode” (mostly used in North America),
or “UR-Mode” (mostly used in Europe,
Mideast, and Asia), on the screen and skip to
Step 6.
3.
While the infotainment screen shows
“Searching for Signal,” press and hold
the hand-held transmitter button about
3to 8cm (1 to 3in) away from the
rear-view mirror. Do not release the
button until “Signal Found” appears on
the infotainment screen.