GMC Yukon 2025 - Apple Carplay and Android Auto

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
164 Infotainment System
•
P
r
ess g on the steering wheel controls.
•
Select Answer on the infotainment display.
Declining aCall
There are two ways to decline acall:
•
Press c on the steering wheel controls.
•
Select Decline on the infotainment display.
Call Waiting
Call waiting must be supported on the
Bluetooth phone and enabled by the wireless
service carrier to work.
Accepting aCall
Press g to answer, then select Switch on the
infotainment display.
Declining aCall
Press c to decline, then select Decline on the
infotainment display.
Switching Between Calls (Call Waiting
Calls Only)
To switch between calls, select Phone on the
infotainment home screen to display Call View.
While in Call View, select the call information of
the call on hold to change calls.
Ending aCall
•
Pr
ess c on the steering wheel controls.
•
Select # on the infotainment display, next
to acall, to end only that call.
Dual Tone Multi-Frequency (DTMF) Tones
The in-vehicle Bluetooth system can send
numbers during a call. This is used when calling
amenu-driven phone system. Use the Keypad
to enter the number.
Apple CarPlay and Android Auto
If equipped, Apple CarPlay and/or Android
Auto capability may be available through
acompatible smartphone. If the phone is
paired and projections are available, Apple
CarPlay and/or Android Auto icons will become
illuminated on the infotainment home screen.
To use Apple CarPlay and/or Android Auto:
For Wired Phone Projection
1. For Android 9smartphones and older,
download the Android Auto app to your
phone from the Google Play Store. There is
no app required for Apple CarPlay.
2. Connect your Android phone or Apple
iP
hone by using the factory-provided
phone USB cable and plugging into aUSB
data port. For best performance, it is highly
recommended to use the device’s factory-
provided USB cable, which should be
replaced after significant wear to maintain
connection quality. Aftermarket or third-
party cables may not work.
3. When the phone is first connected, to
activate Apple CarPlay or Android Auto,
accept the terms and conditions on both the
infotainment system and the phone.
4. Follow the instructions on the phone.
The Android Auto and Apple CarPlay icons on
the infotainment home screen will illuminate.
Android Auto and/or Apple CarPlay may
automatically launch the next time the USB is
connected. If not, select the Android Auto or
Apple CarPlay icon on the infotainment home
screen to launch.
Select { on the center stack to return to the
infotainment home screen.