GMC Yukon 2025 - Page 33

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
32 Keys, Doors, and Windows
Warning (Continued)
avehicle with children. When there are
children in the rear seat, use the window
lockout switch to prevent operation of the
windows. See Keys 37.
The power windows work when the vehicle
is
on, in accessory mode, or when Retained
Accessory Power (RAP) is active. See Retained
Accessory Power (RAP) 3201.
Using the window switch, press to open or pull
to close the window.
The windows may be temporarily disabled if
they are used repeatedly within ashort time.
Rear Window Lockout
If
equipped, this feature prevents rear seat
passengers from opening the rear windows.
To enable or disable the feature:
•
Press 2 to engage the rear window
lockout feature. The indicator light is on
when engaged.
•
Press 2 again to disengage.
Window Express Movement
This feature allows you to open all windows
fully without holding the switches down. Press
the switch down fully, then release to express
open the window.
If equipped, pull the window switch up
fully and quickly release to express close
the window.
Briefly press or pull the window switch in
the same direction to stop that window’s
express movement.
Window Automatic Reversal System
If equipped, the window automatic reversal
system reverses and stops window movement
if it detects an object in its path. Extreme cold or
ice may cause the window to auto-reverse. The
w
indow will operate normally after the object
or condition is removed.
Automatic Reversal System Override
{ Warning
I
f automatic reversal system override
is
active, the window will not reverse
automatically. You or others could be
injured and the window could be damaged.
Before using automatic reversal system
override, make sure that all people and
obstructions are clear of the window path.
When the vehicle is on, override the automatic
r
eversal system by pulling and holding the
window switch if conditions prevent the
window from closing.
Programming the Power Windows
Programming may be necessary if the vehicle
battery is disconnected or discharged. To
program an express-close window:
1. Close all doors.
2. Turn the vehicle on.