GMC Yukon 2025 - Tire Changing

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
Vehicle Care 369
{ Warning
C
hanging atire can be dangerous. The
ve
hicle can slip off the jack and roll over
or fall causing injury or death. Find alevel
place to change the tire. Do not attempt to
change a tire on unlevel, off-road terrain. To
help prevent the vehicle from moving:
1. Set the parking brake.
2. Shift the vehicle to P (Park).
3. For vehicles with four-wheel drive with
an N(Neutral) transfer case position, be
sure the transfer case is in a drive gear —
not in N (Neutral).
4. Turn off the engine and do not restart
while the vehicle is raised.
5. Do not allow passengers to remain in
the vehicle.
6. Place wheel blocks, if equipped, on both
sides of the tire at the opposite corner of
the tire being changed.
To safely change aflat tire:
1. If equipped, place wheel blocks (1),
as
shown, to prevent the vehicle
from moving.
2. Use the jacking equipment to change the
flat tire (2). See Tire Changing 3369.
Tire Changing
Before changing aflat tire, see “Hands-Free
Operation” under Liftgate 318.
Removing the Spare Tire and Tools
The equipment needed to change aflat tire is
stored in the rear of the vehicle. The jacking
tools are under the load floor, secured with
velcro straps. The jack is behind adoor in the
trim panel on the driver side.
1. Pull to open the trim panel door.
Th
e third row driver side seat may need to
be folded to access the trim panel door.