GMC Yukon 2025 - Page 51

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
50 Seats and Restraints
Driver Side Rear Panel Switch
2.
Press the automatic seat release switch
on the panel behind the rear doors. The
seatback automatically folds flat.
3. Press the switch again to release the rear
of the seat from the floor. The seat will
tumble forward.
Folding and Tumbling the Second Row Seat
from the Cargo Area (Base Model Only)
The vehicle must be in P (Park) for this feature
to work.
1. Second Row Power Seat Fold and
Tu
mble Switches
2. Third Row Power Seat Fold and
Raise Switches
To fold and tumble the seat from the cargo area:
1. Make sure that there is nothing under, in
front of, or on the seat.
2. Press the switch (1) on the side trim of the
cargo area to fold the second row seatback.
The left switch folds the left seatback, and
the right switch folds the right seatback.
3. Press the switch again to release the rear
of the seat from the floor. The seat will
tumble forward.
The switches (2) can be used to fold the third
ro
w seatbacks from the cargo area. See Third
Row Seats 352.
Returning the Seat to the Sitting Position
{ Warning
I
f either seatback is not locked, it could
mo
ve forward in asudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatbacks to be sure they are locked.
To return the seat to the sitting position from
t
h
e tumbled position:
1. Pull the seat down until it latches to the
floor. The seatback cannot be raised if the
seat is not latched to the floor.
2. Lift the seatback and push it rearward. Push
and pull on the seatback to make sure it
is locked.
3. For the 60/40 split-bench seat, make sure
the seat belt in the center seating position
is not caught between the two seats and is
not twisted.