Automatic Transmission Operation
There are several different positions for your shift lever.
Your vehicle is equipped with an automatic transmission
and features an electronic shift position indicator
within the instrument panel cluster. This display must be
powered anytime the shift lever is capable of being
moved out of
PARK
(P).
PARK (P): This position locks your rear wheels. It’s the
best position
to
use when you start your engine
because your vehicle can’t move easily.
It is dangerous to get out of your vehicle if the
shift lever is not fully
in
PARK (P) with the
parking brake firmly set. Your vehicle can roll.
Don’t leave your vehicle when the engine
is
running unless you have to.
If
you have left the
engine running, the vehicle can move
CAUTION: (Continued)
suddenly. You or others could be injured. To
be sure your vehicle won’t move, even when
you’re on fairly level ground, always set your
parking brake and move the shift lever to
PARK
(P). See “Shifting Into Park (P)”
in
the
Index.
If
you’re pulling a trailer, see “Towing a
Trailer”
in
the Index.
I
If
you have four- wheel drive, your
v
icle will
be free to roll
-
even if your shift lever
is
in
PARK (P)
-
if your transfer case
is
in
NEUTRAL. So, be sure the transfer case
is
in
a
drive gear, two-wheel high
(2H)
or four- wheel
high
(4H) or four-wheel low (4L)
-
not
in
NEUTRAL. See ”Shifting into Park (P)”
in
the index.
2-25
To Next Page
Loading...
