EasyManua.ls Logo

GMC YUKON XL 2003 - Heated Seats; Reclining Seatbacks

GMC YUKON XL 2003
516 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can also reshape the side wing area of the lower
seatback for more lateral support. To increase or
decrease support, press and hold the top or bottom of
the control. Let go
of the control when the lower
seatback reaches the desired level of support.
Heated Seats
If
your vehicle has this
feature, the button used to
control the driver’s
heated seat is located on
the driver’s door panel.
The button used
to
control
the passenger’s heated
seat is located on the
passenger’s door panel.
To heat the entire seat, press the horizontal button.
Press the button to cycle through the temperature
settings of high, medium, and low. The indicator light
will glow to indicate the level
of
heat selected.
To heat only the seatback, press the vertical button with
the heated seatback symbol. An indicator light on the
button will glow to designate that only the seatback
is being heated.
The engine must be running
for them to operate.
The heated front seats will be canceled after the ignition
is turned
off.
If
you still want to use the heated front
seat feature after you restart your vehicle, you will need
to press the heated seat button again.
Reclining Seatbacks
To adjust the front seatback, lift the manual lever
located on the outboard side
of
the seat. Release the
lever to lock the seatback where you want it. Lift
the lever again without pushing on the seatback and the
seatback will go to an upright position.
1
-5

Table of Contents

Related product manuals