Stopping and Resume Playback
To stop a disc, press and release the stop button on the
DVD player or the remote control. To resume playback,
press the playlpause button on the DVD player or
the remote control.
As
long as the disc has not been
ejected and the stop button has not been pressed twice,
the movie should resume play from where it was last
stopped.
If
the disc has been ejected, or
if
the stop
button has been pressed twice, the disc will resume play
at the beginning.
Ejecting a Disc
Press the eject button on the DVD player to eject
the disc.
If
a disc is ejected from the player, but is not
removed, the DVD player will reload the disc within
25
to 30 seconds. The disc will then be stored in the
DVD player. The DVD player will not resume play of this
disc automatically.
DVD
Messages
The following errors may be displayed on the video
screen:
Disc
Format Error:
This
message will be displayed
if
a disc is inserted upside down,
if
the disc is not
able to be read or
if
the disc format is not
compatible with the DVD player.
0
Load/Eject Error: This message will be displayed
if
the disc is not properly loaded or ejected.
Disc Play Error: This message will be displayed
if
the DVD player can not play the disc. Severely
damaged discs will cause this error.
Region Code Error: This message will be
displayed
if
the region code of the DVD is not
compatible with the DVD player.
No
Disc: This message will be displayed
if
the
PLAY
button
is
pressed and no disc is in the player.
3-1 15
To Next Page
Loading...
