Four-Wheel-Drive Vehicles
1
Use the following procedure to tow your vehicle:
1.
Firmly set the parking brake.
2.
Shift the transmission to PARK
(P).
3.
Securely attach the vehicle being towed to the tow
4.
Shift the transfer case to NEUTRAL. See
vehicle.
Four-wheel Drive
on
page
2-28
for the proper
procedure to select the NEUTRAL position for your
vehicle.
5.
Release the parking brake only after the vehicle
being towed is firmly attached to the following
vehicle.
6.
Turn the ignition off.
-
Shifting a four-wheel-drive vehicle’s transfer
case into NEUTRAL can cause your vehicle
to
roll even
if
the transmission is in Park
(P).
Yo1
or others could be injured. Make sure the
parking brake is firmly set before you shift the
transfer case to NEUTRAL.
I
4-54
To Next Page
Loading...
