EasyManua.ls Logo

GMC YUKON/XL 2021 - Advanced Vehicle Systems and Controls; Adaptive Cruise Control-Advanced Operation

GMC YUKON/XL 2021
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
The Rear Seat Media system includes 2 touch-
screens, 2 USB-C ports, 2 HDMI ports, and 2
wireless infrared headphones.
To power on the system and view the Home
page, double tap anywhere on either screen.
To power on the system and control the
screen sources from the front seats, select
the Rear Media icon on the Home page of
the infotainment screen.
Video sources include the USB or HDMI ports located on the rear of the center
console. Any USB port in the vehicle also can be used to provide content for the
system.
To enable the 110-volt outlet on the rear of the center console, with the vehicle On,
press the Power Outlet button on the left side of the instrument panel.
See Infotainment System in your Owner’s Manual.
INTELLIBEAM LIGHTING SYSTEM
The IntelliBeam system automatically turns the high-beam headlamps on/o based
on trac conditions when the lamp control is in the AUTO or
Headlamps position
and the system is activated, indicated by a green
indicator on the instrument
cluster. A blue
indicator appears when the high-beam headlamps are on. The sys-
tem is turned o if the high/low-beam changer or the ash-to-pass feature is used.
To enable the IntelliBeam system, activate the high/low-beam changer on and
then o within 2 seconds using the turn signal lever.
Note: IntelliBeam activates the high-beam headlamps only when driving over 25 mph.
See Lighting in your Owner’s Manual.
REAR SEAT MEDIA SYSTEM
F
ADAPTIVE CRUISE CONTROLADVANCED
F
The system enhances regular Cruise Control to
maintain a following gap — the time between
your vehicle and a vehicle detected directly
ahead — by accelerating or braking automati-
cally while you continue to steer.
Press and hold the Cancel button to
switch between regular Cruise Control
and Adaptive Cruise Control–Advanced.
Use the steering wheel controls to set and
adjust Cruise Control or Adaptive Cruise Control–Advanced.
With Adaptive Cruise Control–Advanced active, press and release the
Following Gap button to select a gap setting of Far, Medium or Near.
See Driving and Operating in your Owner’s Manual.
F
Optional equipment

Related product manuals