6
ELECTRONIC PRECISION SHIFT TRANSMISSION
The Electronic Precision Shift transmission control
switches are located on the center of the instru-
ment panel. The selected gear position illuminates
in red on the switch.
Park – Press the P button to shift to Park.
Reverse – Pull the R switch to shift to Reverse.
Neutral – Press and hold the N button to shift
to Neutral.
Drive – Pull the D switch to shift to Drive.
Note: To place the transmission in Neutral for an extended period while using
an automatic car wash, refer to Car Wash Mode in your Owner’s Manual.
ELECTRONIC RANGE SELECT MODE
Electronic Range Select Mode allows you to choose the top gear limit. It can be used
to limit the vehicle’s speed when driving on a downhill grade or towing a trailer.
1. With the transmission in D (Drive), press the L (Low) button.
2. Press the + (plus) or – (minus) button to increase or decrease the gear range avail-
able. The highest available gear is displayed on the Driver Information Center.
If vehicle speed is too high for the requested gear, the shift will not occur.
See Driving and Operating in your Owner’s Manual.
DRIVER INFORMATION CENTER
The Driver Information Center (DIC) on the instrument cluster displays a variety of
vehicle messages and system information.
DIC CONTROLS
Use the controls on the right side of the steering
wheel to view the various menus.
Press the
or
buttons (A) to move
between the display pages.
Rotate the thumbwheel (B) up or down to
move through the menus.
Press the thumbwheel to open a menu, select
an item, or clear a message.
SELECT INFO PAGES
F
1. Open the Info or Options menu.
2. Scroll to Info Page Options. Press the thumb-
wheel to enter the menu.
3. Scroll through the list of items.
4. Press the thumbwheel to select/deselect an
item to display in the Info menu.
Fully equipped model shown
See Instruments and Controls in your Owner’s Manual.
F
Optional equipment
Denali model shown
B
A
To Next Page
Loading...
