GMC YUKON/XL 2021 - Rear Seats

8
2ND-ROW SEAT ADJUSTMENTS
To slide a 2nd-row seat, lift the front lever
(A) on the side of the seat cushion.
To recline a 2nd-row seatback, lift the rear
lever (B) on the side of the seat cushion and
push on the seatback.
To fold a 2nd-row seat, lift the rear lever (B)
on the side of the seat cushion or, from the
3rd-row seat, pull the strap (C) on the bot-
tom of the seatback. The seatback will fold forward. Lift the lever or pull the strap
again to tumble the seat forward.
To return the seat to the upright position,
lift the seatback until it locks in place and
then slide the seat rearward by lifting the
front lever (A) on the side of the seat
cushion.
Note: Do not slide the 2nd-row seat while folded.
POWER FOLDING 2ND-ROW SEATS
F
1. Unbuckle the seat belts, make sure nothing
is under or in front of the seats, and move
the front seats forward enough to allow room for the folded seat.
2. Press the Seat Release button (D) on the panel behind each rear door or
the
x2
2nd-Row Seat button (E) in the rear cargo area. The seatback will fold
forward.
3. Press either button again to tumble the
seat forward.
To return the seat to the upright position,
pull the seat down until it latches to the
oor and then lift the seatback until it
locks in place.
POWER FOLDING/UNFOLDING 3RD-ROW
SEATS
F
1. Unbuckle the seat belts, make sure nothing is on the seats, and move the 2nd-row
seats forward enough to allow room for the folded seats.
2. Press and hold the bottom of the 3rd-Row Seat button (F) in the cargo area or
3rd-Row Folding Seat button on the front overhead console to fold the seat-
back.
To unfold the seat, press and hold the top of either button.
CLEANING THE SEATS
The seats are easily cleanable. For best results, using a damp, soft microber cloth,
gently rub from the outside edge of the soiled edge to the center.
See Seats and Restraints in your Owner’s Manual.
REAR SEATS
F Optional equipment
D
C
B
A
E F