2-8
USER HANDBOOK
2.5.1 Location (LOC) Selector
The SHIPSURVEYOR instrument features a ‘LOC’ location
selector, allowing the user to allocate datalogged readings
to a location (LOC) of a vessel. Refer to Chapter 3.18 for
more details.
2.6 Max / Min Values
The SHIPSURVEYOR instrument records the maximum /
minimum gas values for each sensor, since switch-on.
2.7 Construction
The instrument is housed in a tough, impact resistant,
moulded case made of polypropylene.
The top panel features a carbon loaded polycarbonate
LCD cover.
The battery cover is attached to the main instrument body
by means of two stainless steel hexagonal screws.
The instrument is sealed against dust and water to IP54
standard. The instrument sensors are protected from dust
and water by an integral hydrophobic lter.
2.8 Batteries
The SHIPSURVEYOR instrument can operate on either two
(2) alkaline or rechargeable cells. Typical operating times
are as follows:
Alkaline Rechargeable
Two (2) Cells
> 20 hrs > 8 hrs
Fig. 2-8 Typical Battery Operating Times
A battery symbol, as illustrated in Fig. 2-9, provides an
indication of remaining battery life. The symbol is displayed in
To Next Page
Loading...