GMI Shipsurveyor - Instrument Identification

3-5
OPERATION
Note: If choice of language is not congured, the warm-
up cycle will automatically continue with the
congured language.
To select the required language option
• Single press the Top Button , or single press
Bottom Button , to highlight required language.
• Press and hold OK (the Bottom Button) to
conrm selection.
3.6 Instrument Identication
During the warm-up cycle, the instrument display identies
the model, serial number, software version, datalogging,
battery status and calibration gas information as illustrated
in Fig. 3-6:
Fig. 3-6 Instrument Identication
Note: The battery symbol is indicated during the warm-
up cycle, then on the bottom RH corner of the
display during normal operation.