GMI Shipsurveyor - Service Due Date

3-12
USER HANDBOOK
3.9 Service Due Date
The Service due date can be set by the workshop and is set
to two (2) years by default from last service date. The date
can be set over a period of 1 to 36 months in 1 month steps.
Note : The service due date, if enabled, will only
be displayed if less than 90 days from the
current date.
The SERVICE DUE feature has ve (5) congurable options:
1. NOT USED (DEFAULT)
Service Due date message is not displayed during
warm-up (Default).
2. SERVICE DUE DATE MESSAGE IS DISPLAYED
(OPTION)
Service Due date message is displayed, as illustrated
in Fig. 3-18.
Fig. 3-18 Service Due Date