GMI Shipsurveyor - Alarm Warning (CGI Mode Only)

3-21
OPERATION
3.11 Alarm Warning (CGI mode only)
When the instrument has been switched ON in CGI mode
and if congured, a ‘WARNING’ ashes in the display as
illustrated in Fig. 3-32, to alert the user that alarms are
disabled in this mode.
alternates with
Fig. 3-32 Alarm Disabled Warning
To continue operation:
• Press and hold ‘YES’ (Top Button) for one
second.
To abort instrument warm-up:
• Press and hold ‘NO’ (Bottom Button) for one
second. The instrument automatically switches OFF.