GMI Shipsurveyor - Location (LOC) Selector; To Select a Location (LOC)

3-28
USER HANDBOOK
3.19 Location (LOC) Selector
The SHIPSURVEYOR instrument features a ‘LOC’ location
selector allowing the user to allocate datalogged readings
to a location (LOC) of a vessel.
For example, if ‘HOLD1’ is selected, all subsequent
datalogging (manual and automatic) will be referenced to
‘HOLD1’.
300 Location (LOC) names are available and can be
customised to meet individual user requirements.
Location (LOC) names can only be customised and
stored in the instrument using the Shipsurveyor Data
Downloading Software (GMI Part No. 48150).
3.19.1 To select a location (LOC):
The location list can be accessed by simultaneously pressing
the Top Button and Bottom Button for two (2) seconds.
1. Location data already stored in the instrument:
If location data has previously been stored in the
instrument, it will now be displayed as illustrated in
Fig. 3-39.
Fig. 3-39 ‘LOC’ Display