GMI Shipsurveyor - Battery Exhausted Conditions; Battery Exhausted Display and Shutdown

4-17
ALARMS
In CSM mode, the instrument audible alarm will activate. The
visual alarm (yellow and four red LED’s) will also activate.
In CGI mode, only the visual alarm (yellow LED) will activate.
4.5.9 BATTERY EXHAUSTED
When ‘BAT’ ashes in the display, as shown in Fig. 4-15, the
instrument batteries are almost exhausted.
Fig. 4-15 BAT-BAT
In CSM mode, the instrument audible alarm will activate. The
visual alarm (yellow and four red LED’s) will also activate.
In CGI mode, only the visual alarm (yellow LED) will activate.
In both modes, the instrument automatically switches OFF.
The instrument batteries must be replaced.
(Refer to Chapter 5, ‘Operator Maintenance’).