GMI Shipsurveyor - Completing Battery Replacement; Removing and Installing Batteries; Final Checks After Replacement

5-4
USER HANDBOOK
3) Remove the alkaline / rechargeable batteries.
4) Charge rechargeable batteries using a commercial
type charger. Charging duration is dependent on
chargertypeandconditionofrechargeablebatteries.
5) Check battery compartment for damage to spring
contacts or corrosion on springs.
6) Insert new alkaline / fully charged rechargeable
batteries, observing correct polarity indication in
batterycompartmentbase.
7) Replacebatterycoverandfastenbothbasescrews.
8) Check that the instrument switches on and works to
specication.