GMI Shipsurveyor - Page 86

7-2
USER HANDBOOK
Note: All Shipsurveyor instruments are supplied in a hard
Carry Case c/w: Neck / Shoulder Harness; 4mm Hex
Driver; Probe Handle c/w 1m (39ins.) Conductive Tubing;
15cm (6ins.) Open End Probe; Box (10) Cotton Filters x 2;
User Handbook; Quick Operating Instructions; Calibration
Certicate; Conguration Report; Datalogging & exiCal Plus
(Calibration) Software & IrDA Adaptor.
Accessories available for SHIPSURVEYOR:
Part Number Description
48100 Hard Carry Case
48101 Leather Field Case
12370 Neck / Shoulder Harness
12371 Waist Harness
48120 Probe Handle c/w 1m (39in.) Conductive
Tubing
12358 Hydrophobic Filter
10077 Cotton Filters (Box of 10)
12688 Sample Line Adaptor
12712 Clear Sample Line - per metre
48102 Ball Float
48142 Sample Line Adaptor c/w Waist
Harness, Quick Connect, and
Conductive Tubing x 10m (32ft.)
48145 Sample Line Adaptor c/w Waist
Harness, Quick Connect, and
Conductive Tubing x 25m (80ft.)
48147 Sample Line Adaptor c/w Waist
Harness, Quick Connect, and
Conductive Tubing x 35m (114ft.)
13427 35cm (14in.) Open End Probe
13413 35cm (14in.) S/Steel Open End Probe
12287 50cm (20in.) S/Steel Open End Probe