GMI Tricon - Mounting and Removing Termination Boards; Mounting on 35 mm DIN-Rail; Removing from 35 mm DIN-Rail; Overall Dimensions

Termination Boards for Tricon & Tricon CX G.M. International ISM0452-6
6
Models mounting and removing
Mounting:
To mount termination board on 35 mm DIN-Rail, hook one side of the mounting foot over
the rail’s lip and press the Termination Board down firmly until fixed (see Fig.1).
Removing:
To remove a termination board from the mounting rail, insert a blade screwdriver in the
mounting foot and lever (see Fig. 2).
Fig. 1
Push to
engage
Overall dimensions
For the following termination board:
TB-D5016-TRI-010 / TBE-D5016-TRI-010.
125 [4.9”] 29 [1.1”]
154 [6.0”]
With 2 x Plastic DIN-Rail clips TBE-FIX-PL-001, with all dimensions are expressed in millimeters [inches] - only for TBE-D5016-TRI-010:
67 [2.6”]
67 [2.6”]
210 [8.3”]
12 [0.5”]
74 [2.9”]
96 [3.8”]
170 [6.7”]
125 [4.9”] 25 [1.0”]
150 [5.9”]
With 2 x Metal DIN-Rail clips TBE-FIX-MT-001, with all dimensions are expressed in millimeters [inches]:
33 [1.3”]
33 [1.3”]
210 [8.3”]
12 [0.5”]
74 [2.9”]
96 [3.8”]
170 [6.7”]
Fig. 2
Pull the termination board upwards
and remove from DIN-Rail
For termination board with 1 x or 2 x Plastic DIN-Rail clips TBE-FIX-PL-001:
Mounting:
To mount termination board on 35 mm DIN-Rail, hook one side of the mounting foot over
the rail’s lip and press the Termination Board down firmly until fixed (see Fig.3).
Removing:
To remove a termination board from the mounting rail, insert a blade screwdriver in the
mounting foot and lever (see Fig. 4).
For termination board with 1 x or 2 x Metal DIN-Rail clips TBE-FIX-MT-001:
Fig. 4
Pull the termination board upwards
and remove from DIN-Rail
Push to
engage
Fig. 3