Product Operation
POWER ON
POWER OFF
Wi-Fi CLOUD
MODE CHANGE
Wi-Fi USER
REGISTRATION
All LED will be turned on when the engine is on or power is on.
[Start recording] starts along with voice guidance and REC LED is turned on.
GPS LED will be turned off if it is not connected by GPS.
All LEDs will be turned off when press the power button or the constant
cable is disconnected.
If you press the Wi-Fi button for 3~4 seconds, it changes from Wi-Fi mode
to Cloud mode or from Cloud mode to Wi-Fi mode.
If press the Wi-Fi button, the stand-by mode voice guidance will be displayed.
If there is no connection for 2 minutes, it will be automatically discontinued.
If press the Wi-Fi button again, the voice guidance will be displayed.
*Notice : You need to set the CLOUD as [OFF] in the viewer, only if you want to convert
[withCLOUD] to GNET APP after you use [withCLOUD] APP.
If you press the power button 1sec twice, you can turn on/off
the Wi-Fi signal. (G-ON, G-ON2, G-ON3, G-ON4, G-ONQ).
If your dash cam is not connected to the CLOUD, please check whether
Wi-Fi is off.
02.FUNCTION
HOW TO USE
17
To Next Page
Loading...
