Recording Mode
- When the power is connected, the normal recording will start.
- Security LED flickers left and right every 2 seconds.
- If there is impact or shock, the record LED will flicker and
record in event recording mode.
- After event recording is finished, it will be automatically
changed to normal recording mode.
- After the parking mode is entered when the ACC voltage
is released, the parking mode automatically operates in
10seconds (3 Wired).
- It is recorded in 10 frames, so the recording time can be extended.
- Security LED flickers left and right every 4 seconds.
- If it connects with ACC voltage, it switchs to normal recording
mode (3 Wired).
- Under parking mode, the device will record any movement happen
within around 3 meters.
- Security LED will quickly flicker.
- When no motion is detected, it automatically changes to parking
mode.
- If press the manual recording button, the device will recognize
the moment as an event and sort out the video in seperated folder
‘manual’.
- It is recorded in 30 frames and security LED will quickly flicker.
Normal Recording
Manual Recording
Event
Recording
Impact
Recording
Parking
Recording
Motion
Detection
recording
02.FUNCTION
W T
US
24
To Next Page
Loading...
