Do you have a question about the Go groove BassPULSE 2MX and is the answer not in the manual?
Controls the sound level of the speakers.
Connects the speakers to an audio source via a 3.5mm jack.
Provides power to the speakers via a USB port.
Indicator light for the speaker status.
Connects the 2MX USB cable to a computer for power and audio.
The LED will glow blue when the device is powered on and connected.
Connects the 3.5mm audio cable from the speakers to the audio source.
Select music and adjust the volume level for playback.
Details on RMS and peak power output for the speakers.
Information on speaker drivers and electrical impedance.
Specifies the audio frequency range and power input requirements.
Physical dimensions, cable lengths, and speaker separation limits.
Loading...