STOP/EJECT
TRACKING
TUNER
TV/VCR
VIEW
VCR
WEEKLY
ZERO RETURN
Press this button on the remote control to stop the
tape in the active deck. Press again to eject a
stopped tape.
Occasionally, when you play a tape that was recorded
on a different VCR or camcorder, white streaks
appear if the recorded tracks do not align precisely
with the playback heads on the VCR. Pressing the
Tracking buttons on the remote control allows you to
manually adjust the tracking while playing a tape.
Device used to receive signals coming into your
television which selects the one channel you want to
watch flom all the diflerent channels which you
have available. The Dual Deck VCR has a 181 channel
tuner. See pages 17 and 35 %r a detailed explanation.
Press to switch control of the picture between the TV
and the VCR. This is the antenna switch. When set to
TV, the antenna signal goes directly to the TV bypass-
ing the VCR; when set to VCR, the antenna signal
goes through the VCR. When the VCR power is off,
it is the same as TV mode.
The signal chosen to be seen on the TV or monitor
(Deck One, Deck Two, Tuner, AUX).
This indicator will be on when the VCR is in VCR
mode and off when the VCR is in TV mode.
Weekly Timer Recording Event which repeats every
seven days at the same time,
From stop, press this button and the currently active
deck will %rward or return to counter time (00:00:00)
and stop.
62 DISCOVERTHE DUAL-DECKDIFFERENCE
To Next Page
